Everything You Want to Know about Motorcycle Tie Down Securement
One of the differences between car securement and motorcycle securement is the car has 4 wheels and can stand firmly on the road, but the motorcycle can’t stand firmly on the ground without a kickstand. So, when you transport a motorcycle at the back of a pickup truck or trailer, balance is the top of securing. If you couldn’t balance the weight of your bike, it may fall down and your motorcycle may be damaged. Ok, so a proper and good quality motorcycle tie down is much more cost-efficient than repairing your motorcycle if it’s damaged.
Our tips for securing a motorcycle are not only motorcycle itself, but also apply for a dirtbike, sports bike, Harley, tricycle, etc. First, you need to find the motorcycle tie down straps that are rated for your motorcycle weight limitation.
Motorcycle Securement Steps
The way to secure a motorcycle on the pickup truck, the trailer may vary, because of the different sizes of trailer and truck and also the different hardware you are using. But the majority of securement methods are the same and you can also do the similar way for dirtbikes, Harley, scooters.
Things you need to prepare before motorcycle securement
- 2 inch ratchet straps with proper hardware and pays attention to the strap working load limit.
- Motorcycle wheel chock to fix the motorcycle position.
- A ramp to connect your motorcycle to the pickup truck or trailer.
- Motorcycle tie down handlebar straps or loop straps
First, you need to choose 4 ratchet straps and 2 handlebar straps, check the weight of your motorcycle and ensure the tie down strap working load limit can hold your motorcycle. Connect handlebar straps with one end of your ratchet strap and another end connect with the securement point of your trailer and then tightened by the ratchet handle.
Second, as stated above, the motorcycle only has two wheels and can not stand firmly on the ground, so you will need the wheel chock to keep the motorcycle balanced during securement and fix the position of your motorcycle. This is the economical way to ensure your motorcycle can be safely secured during transportation. If you do not have a motorcycle wheel chock, you will need to put the kickstand down until you balance both sides of your motorcycle handlebar. Don’t forget to put the kickstand back after balancing your motorcycle.
Third, you need to use the ramp to connect your motorcycle to the back of your trailer or pickup truck. It is better if there is another one that can help you, but if only you and wheel chock is not available, you need to tie down the handlebar first.
Fourth, balancing each of your motorcycle handlebars using a handlebar strap and hook with a ratchet tie down strap, you will need at least 4 ratchet tie down straps, two for the front and two for the back. You just need to move the ratchet handle up and down to tighten the strap. Please pay attention that does not overtighten, because overtight the tie down strap will damage your motorcycle.
3 points to pay attention to when securing your motorcycle
- Do not use the tie down straps that do not mark the working load limit and necessary information.
- Avoid the tightening strap to damage your motorcycle paint, the exhaust system, the fender. You can also put one more layer of Cordura sleeve to protect your tie down webbing from been easily worn out.
- Please pay attention to not ride your motorcycle to the back of a pickup truck or trailer, since the weight of the motorcycle is very heavy and If this weight suddenly overwhelms the back of the trailer, it may be dangerous. You need to use a ramp to let the motorcycle get into the truck bed.
If you have any questions about motorcycle straps or want to find the proper tie down strap for your application, feel free to call or WhatsApp us at (0086)1505 1715 196 or send an email to: info@webslingness.com, our sales team is standing by and willing to communicating with you to help you solve any problems.
Same as the car securement, for motorcycle securement, you also need to check the tightness of the motorcycle strap after several miles of transportation. If the strap is loose, you need to retighten it by the ratcheting handle to ensure safety security during transit.
The storage of the motorcycle trailer straps is also important, you should keep them in a dry and cool place, leave the motorcycle tie down kit away from direct sunlight. If you found any burn, tear and wear, mildew, do not use these unsafe securing straps, buy a new one or buy replacement straps for the damaged part.
You may also interested in:
